Mississippi Online Public and Charter Schools (List)

Mississippi Online Public and Charter Schools (List) Mississippi offers resident students the opportunity to take online public school courses for free. Below is a list of no-cost online schools currently serving elementary and high school students in Mississippi. In order to qualify for the list, schools must meet the following qualifications: classes must be available completely online, they must offer services to state residents, and they must be funded by the government. Virtual schools listed may be charter schools, state-wide public programs, or private programs that receive government funding. List of Mississippi Online Charter Schools and Online Public Schools Mississippi Virtual Public School (off-site link) About Online Charter Schools and Online Public Schools Many states now offer tuition-free online schools for resident students under a certain age (often 21). Most virtual schools are charter schools; they receive government funding and are run by a private organization. Online charter schools are subject to fewer restrictions than traditional schools. However, they are reviewed regularly and must continue to meet state standards. Some states also offer their own online public schools. These virtual programs generally operate from a state office or a school district. State-wide public school programs vary. Some online public schools offer a limited number of remedial or advanced courses not available in brick-and-mortar public school campuses. Others offer full online diploma programs. A few states choose to fund â€Å"seats† for students in private online schools. The number of available seats may be limited and students are usually asked to apply through their public school guidance counselor. (See also: 4 Types of Online High Schools). Choosing a Mississippi Online Public School When choosing an online public school, look for an established program that is regionally accredited and has a track record of success. Be wary of new schools that are disorganized, are unaccredited, or have been the subject of public scrutiny. For more suggestions on evaluating virtual schools see: How to Choose an Online High School.

Battle of Short Hills in the American Revolution

Battle of Short Hills in the American Revolution Battle of Short Hills - Conflict Date: The Battle of Short Hills was fought June 26, 1777, during the American Revolution (1775-1783).   Ã‚   Armies Commanders: Americans General George WashingtonMajor General William Alexander, Lord Stirlingapprox. 2,500 men British General Sir William HoweLieutenant General Lord Charles CornwallisMajor General John Vaughanapprox. 11,000 men Battle of Short Hills - Background: Having been expelled from Boston in March 1776, General Sir William Howe descended on New York City that summer.   Defeating General George Washingtons forces at Long Island in late August, he then landed on Manhattan where he suffered a setback at Harlem Heights in September.   Recovering, Howe succeeded in driving American forces from the area after winning victories at White Plains and Fort Washington.   Retreating across New Jersey, Washingtons beaten army crossed the Delaware into Pennsylvania before halting to regroup.   Recovering late in the year, the Americans struck back on December 26 with a triumph at Trenton before achieving a second victory a short time later at Princeton. With winter setting in, Washington moved his army to Morristown, NJ and entered winter quarters.   Howe did the same and the British established themselves around New Brunswick.   As the winter months progressed, Howe commenced planning for a campaign against the American capital at Philadelphia while American and British troops routinely skirmished in the territory between the encampments.   In late March, Washington ordered Major General Benjamin Lincoln to take 500 men south to Bound Brook with the goal of collecting intelligence and protecting farmers in the area.   On April 13, Lincoln was attacked by Lieutenant General Lord Charles Cornwallis and forced to retreat.   In an effort to better assess British intentions, Washington moved his army to a new encampment at Middlebrook. Battle of Short Hills - Howes Plan: A strong position, the encampment was situated on the south slopes of the first ridge of the Watchung Mountains.   From the heights, the Washington could observe British movements on the plains below which stretched back to Staten Island.   Unwilling to assault the Americans while they held the high ground, Howe sought to lure them down to the plains below.   On June 14, he marched his army Somerset Courthouse (Millstone) on the Millstone River.   Only eight miles from Middlebrook he hoped to entice Washington to attack.   As the Americans showed no inclination to strike, Howe withdrew after five days and moved back to New Brunswick.   Once there, he elected to evacuate the town and shifted his command to Perth Amboy. Believing the British to be abandoning New Jersey in preparation for moving against Philadelphia by sea, Washington ordered Major General William Alexander, Lord Stirling to march towards Perth Amboy with 2,500 men while the rest of the army descended the heights to a new position near Samptown (South Plainfield) and Quibbletown (Piscataway).   Washington hoped that Stirling could harass the British rear while also covering the armys left flank.   Advancing, Stirlings command assumed a line in the vicinity of Short Hills and Ash Swamp (Plainfield and Scotch Plains).   Alerted to these movements by an American deserter, Howe reversed his march late on June 25.   Moving quickly with around 11,000 men, he sought to crush Stirling and prevent Washington from regaining a position in the mountains. Battle of Short Hills - Howe Strikes: For the attack, Howe directed two columns, one led by Cornwallis and the other by Major General John Vaughan, to move through Woodbridge and Bonhampton respectively.   Cornwallis right wing was detected around 6:00 AM on June 26 and clashed with a detachment of 150 riflemen from Colonel Daniel Morgans Provisional Rifle Corps.   Fighting ensued near Strawberry Hill where Captain Patrick Fergusons men, armed with new breech-loading rifles, were able to force the Americans to withdraw up Oak Tree Road.   Alerted to the threat, Stirling ordered reinforcements led by  Brigadier General Thomas Conway forward.   Hearing the firing from these first encounters, Washington ordered the bulk of the army to move back to Middlebrook while relying on Stirlings men to slow the British advance. Battle of Short Hills - Fighting for Time: Around 8:30 AM, Conways men engaged the enemy near the intersection of Oak Tree and Plainfield Roads.   Though offering tenacious resistance that included hand-to-hand fighting, Conways troops were driven back.   As the Americans retreated approximately a mile toward the Short Hills, Cornwallis pushed on and united with Vaughan and Howe at Oak Tree Junction.   To the north, Stirling formed a defensive line near Ash Swamp.   Backed by artillery, his 1,798 men resisted the British advance for around two hours allowing Washington time to regain the heights.   Fighting swirled around the American guns and three were lost to the enemy.   As the battle raged, Stirlings horse was killed and his men were driven back to a line in Ash Swamp. Badly outnumbered, the Americans were ultimately forced to retreat towards Westfield.   Moving quickly to avoid the British pursuit, Stirling led his troops back to the mountains to rejoin Washington.   Halting in Westfield due to the heat of the day, the British looted the town and desecrated the Westfield Meeting House.   Later in the day Howe reconnoitered Washingtons lines and concluded that they were too strong to attack.   After spending the night in Westfield, he moved his army back to Perth Amboy and by June 30 had fully departed New Jersey. Battle of Short Hills - Aftermath: In the fighting at the Battle of Short Hills the British admitted to 5 killed and 30 wounded.   American losses are not known with accuracy but British claims numbered 100 killed and wounded as well as around 70 captured.   Though a tactical defeat for the Continental Army, the Battle of Short Hills proved a successful delaying action in that Stirlings resistance allowed Washington to shift his forces back to the protection of Middlebrook.   As such, it prevented Howe from executing his plan to cut the Americans off from the mountains and defeat them in open ground.   Departing New Jersey, Howe opened his campaign against Philadelphia late that summer.   The two armies would clash at Brandywine on September 11 with Howe winning the day and capturing Philadelphia a short time later.   A subsequent American attack at Germantown failed and Washington moved his army into winter quarters at Valley Forge on December 19. Selected Sources The Battle of the Short HillsRevolutionary War New Jersey - Short HillsBattle of Short Hills Historic Trail

Miguels Hourly Performance Evaluation Essay Example | Topics and Well Written Essays - 500 words - 1

Miguels Hourly Performance Evaluation - Essay Example Voluntarily takes the first initiative in identifying and addressing potential and existing issues, opportunities, and obstacles (The University of British Colombia , 2011). Creatively identify and determine resources, technical needs and support team and initiates planning for potentially significant contingency plan and outcomes by integrating future and conflicting scenarios with opportunities. Focuses on a great consistency to the customers serve both internal and external ensuring high quality products and services by proper aligning and allocating resources to meet the objective of customer satisfaction and product utility. Develops strategies and plan that meet the technology and, or the architecture requirements of the organization. As an IT expert, I use scheduling software incorporate such plans and strategies to the business vision, goals, strategies, priorities, industry trends, emerging technology, and economic viability which help me and the department effectively plan for activities and have ultimately saved the organization time and money (Maurer & Robert, 2012). My business experience helps me run my work activities in a cost efficient manner by proactively conducting work progress and department reviews to reprioritize resources and apply corrective action that respond to business strategy, budget and initiatives against established objectives, and milestone to enhance high level of efficiency and effectiveness. Engages the right group of individuals within and beyond organization boundaries, by matching individual skills and capabilities to buy-in support and problem definition methods of resolution and accountability. Solicits and generates the approval of senior leadership prior to defining acute issues and solution to indistinct, multifaceted teething troubles of high risk, which can span across and beyond the enterprise. Consistently fosters collaboration

Lit Review and Methodology Research Paper Example | Topics and Well Written Essays - 1750 words

Lit Review and Methodology - Research Paper Example One of the theories has proposed that media play a significant role in providing behavioral roles (Nabi & Oliver, 2009). Most people engage in types of behaviors that they watch or admire in movies. Another important theory called emotional release (Berger, 2007). Aristotle used this theory to argue for the role of drama in preventing warfare. In the recent past, the same theory is used basically to prove the violence that is sometimes displayed in the media. Therefore, the people in this theory were assumed to understand the impacts of violence by witnessing or seeing it being enacted and would seldom take part in such behaviors (Berger, 2007). The fact that media has a role to play in most of the societal issues is also supported by authors. Nabi & Oliver (2009) asserts that audience dependency on media is considerably high in societies where media serve most of the central information functions and in periods of pervasive civil strife or rapid social changes. In the recent few yea rs, the growth of new media platforms including YouTube, twitter, and Facebook has enabled youths, adults and the society in general to take more significant steps to reach and be reached almost anywhere and everywhere at any given time (Nabi & Oliver, 2009). ... Social media play a significant role in most of the relationships in our societies. However, according to Duhe? (2007), some of the roles are not always positive. Research carried by Haythornthwaite (2011) on the strong, weak and latent ties and the impact of new media, indicated that media may have negative impacts on personal relationships. Most of the relationships keep up through some of the latest social media forums including twitter, Facebook, LinkedIn and blog comments are more casual and the participants tended to know less about one another (Haythornthwaite, 2011). Other literatures have also raised concerns over the impact of the new social Media (Biagi, 2011). Nesbitt-Larking (2007), for instance, enumerates the dangers associated with making the meaning of conversations clear electronically. He further asserts that Media platforms are used to make confrontations easier and more relationships impacted as a result (Nesbitt-Larking, 2007). Perse (2001) also argues that beca use electronic media’s transmission of emotions is considerably poor compared to physical interactions, people tend to use it as perfect tool to send some of their difficult messages that would otherwise not been conveyed on a face-to-face basis. Although the society may enjoy some of the relationships by use of the new social sites like Facebook and twitter, the difference that exists between these social platforms and the interaction that involve physical presence of people is clearly very vast (Sparks, 2010). Sparks (2010) also argues that although the social media, regarded to have the power to connect the users to some of the people whom they would otherwise not touch, the problem comes when the society find themselves

Optical Computing Essay Example for Free

Optical Computing Essay Jainam Shah Kalol Institute Of Technology, Kalol, Gujarat, India. [emailprotected] Abstract—Optics has been used in computing for a number of years but the main emphasis has been and continues to be to link portions of computers, for communications, or more intrinsically in devices that have some optical application or component (optical pattern recognition, etc). Optical digital computers are still some years away, however a number of devices that can ultimately lead to real optical computers have already been manufactured, including optical logic gates, optical switches, optical interconnections, and optical memory. The most likely near-term optical computer will really be a hybrid composed of traditional architectural design along with some portions that can perform some functional operations in optical mode. Computing applications as a consequence of faster processing speed, as well as better connectivity and higher bandwidth. II. NEED FOR OPTICAL COMPUTING The pressing need for optical technology stems from the fact that today’s computers are limited by the time response of electronic circuits. A solid transmission medium limits both the speed and volume of signals, as well as building up heat that damages components. One of the theoretical limits on how fast a computer can function is given by Einstein’s principle that signal cannot propagate faster than speed of light. So to make computers faster, their components must be smaller and there by decrease the distance between them. This has resulted in the development of very large scale integration (VLSI) technology, with smaller device dimensions and greater complexity. The smallest dimensions of VLSI nowadays are about 0.08mm. Despite the incredible progress in the development and refinement of the basic technologies over the past decade, there is growing concern that these technologies may not be capable of solving the computing problems of even the current millennium. The speed of computers was achieved by miniaturizing electronic components to a very small micron-size scale, but they are limited not only by the speed of electrons in matter but also by the increasing density of interconnections necessary to link the electronic gates on microchips. The optical computer comes as a solution of miniaturization problem. Optical data processing can perform several operations in parallel much faster and easier than electrons. This parallelism helps in staggering computational power. For example a calculation that takes a conventional electronic computer more than 11 years to complete could be performed by an optical computer in a single hour. Any way we can realize that in an optical computer, electrons are rep laced by photons, the subatomic bits of electromagnetic radiation that make up light. I. INTRODUCTION With the growth of computing technology the need of high performance computers (HPC) has significantly increased. Optics has been used in computing for a number of years but the main emphasis has been and continues to be to link portions of computers, for communications, or more intrinsically in devices that have some optical application or component (optical pattern recognition etc.) Optical computing was a hot research area in 1980’s.But the work tapered off due to materials limitations that prevented opt chips from getting small enough and cheap enough beyond laboratory curiosities. Now, optical computers are back with advances in self-assembled conducting organic polymers that promise super-tiny of all optical chips. Optical computing technology is, in general, developing in two directions. One approach is to build computers that have the same architecture as present day computers but using optics that is Electro optical hybrids. Another approach is to generate a completely new kind of computer, which can perform all functional operations in optical mode. In recent years, a number of devices that can ultimately lead us to real optical computers have already been manufactured. These include optical logic gates, optical switches, optical interconnections and optical memory. Current trends in optical computing emphasize communications, for example the use of free space optical interconnects as a potential solution to remove ‘Bottlenecks’ experienced in electronic architectures. Optical technology is one of the most promising, and may eventually lead to new III. SOME KEY OPTICAL COMPONENTS FOR COMPUTING The major breakthroughs on optical computing have been centered on the development of micro-optic devices for data input. A. VCSEL (Vertical Cavity Surface Emitting Laser) VCSEL (pronounced ‘vixel’) is a semiconductor vertical cavity surface emitting laser diode that emits light in a cylindrical beam vertically from the surface of a fabricated wafer, and offers significant advantages when compared to the edge-emitting lasers currently used in the majority of fiber optic communications devices. The principle involved in the operation of a VCSEL is very similar to those of regular lasers. Fig. 2. Optical Interconnection Of Circuit Boards Using Vcsel And Photodiode VCSEL convert the electrical signal to optical signal when the light beams are passed through a pair of lenses and micromirrors. Micromirrors are used to direct the light beams and this light rays is passed through a polymer waveguide which serves as the path for transmitting data instead of copper wires in electronic computers. Then these optical beams are again passed through a pair of lenses and sent to a photodiode. This photodiode convert the optical signal back to the electrical signal. B. SLM (Spatial Light Modulators) SLM play an important role in several technical areas where the control of light on a pixel-by-pixel basis is a key element, such as optical processing and displays. 1) SLM For Display Purposes Fig. 1. Two semiconductor materials sandwiching an active layer There are two special semiconductor materials sandwiching an active layer where all the action takes place. But rather than reflective ends, in a VCSEL there are several layers of partially reflective mirrors above and below the active layer. Layers of semiconductors with differing compositions create these mirrors, and each mirror reflects a narrow range of wavelengths back in to the cavity in order to cause light emission at just one wavelength. For display purposes the desire is to have as many pixels as possible in as small and cheap a device as possible. For such purposes designing silicon chips for use as spatial light modulators has been effective. The basic idea is to have a set of memory cells laid out on a regular grid. These cells are electrically connected to metal mirrors, such that the voltage on the mirror depends on the value stored in the memory cell. A layer of optically active liquid crystal is sandwiched between this array of mirrors and a piece of glass with a conductive coating. The voltage between individual mirrors and the front electrode affects the optical activity of liquid crystal in that neighborhood. Hence by being able to individually program the memory locations one can set up a pattern of optical activity in the liquid crystal layer. C. Smart Pixel Technology Smart pixel technology is a relatively new approach to integrating electronic circuitry and optoelectronic devices in a common framework. The purpose is to leverage the advantages of each individual technology and provide improved performance for specific applications. Here, the electronic circuitry provides complex functionality and programmability while the optoelectronic devices provide high-speed switching and compatibility with existing optical media. Arrays of these smart pixels leverage the parallelism of optics for interconnections as well as computation. A smart pixel device, a light emitting diode under the control of a field effect transistor can now be made entirely out of organic materials on the same substrate for the first time. In general, the benefit of organic over conventional semiconductor electronics is that they should lead to cheaper, lighter, circuitry that can be printed rather than etched. D. WDM (Wavelength Division Multiplexing) Wavelength division multipl exing is a method of sending many different wavelengths down the same optical fiber. Using this technology, modern networks in which individual lasers can transmit at 10 gigabits per second through the same fiber at the same time. which interact with light and modulate its properties. Several of the optical components require efficient-nonlinear materials for their operations. What in fact restrains the widespread use of all optical devices is the in efficiency of currently available nonlinear materials, which require large amount of energy for responding or switching. Organic materials have many features that make them desirable for use in optical devices such as 1) High nonlinearities 2) Flexibility of molecular design 3) Damage resistance to optical radiations Some organic materials belonging to the classes of phthalocyanines and polydiacetylenes are promising for optical thin films and wave guides. These compounds exhibit strong electronic transitions in the visible region and have high chemical and thermal stability up to 400 degree Celsius. Polydiacetylenes are among the most widely investigated class of polymers for nonlinear optical applications. Their subpicosecond time response to laser signals makes them candidates for high-speed optoelectronics and information processing. To make thin polymer film for electro-optic applications, NASA scientists dissolve a monomer (the building block of a polymer) in an organic solvent. This solution is then put into a growth cell with a quartz window, shining a laser through the quartz can cause the polymer to deposit in specific pattern. V. ADVANCES IN PHOTONIC SWITCHES Logic gates are the building blocks of any digital system. An optical logic gate is a switch that controls one light beam by another; it is ON when the device transmits light and it is OFF when it blocks the light. Fig. 3. a. Wave length division multiplexing b. A WDM System WDM can transmit up to 32 wavelengths through a single fiber, but cannot meet the bandwidth requirements of the present day communication systems. So nowadays DWDM (Dense wavelength division multiplexing) is used. This can transmit up to 1000 wavelengths through a single fiber. That is by using this we can improve the bandwidth efficiency. IV. ROLE OF NLO IN OPTICAL COMPUTING The role of nonlinear materials in optical computing has become extremely significant. Non-linear materials are those, Fig. 4. Optical AND-logic gate To demonstrate the AND gate in the phthalocyanine film, two focused collinear laser beams are wave guided through a thin film of phthalocyanine. Nanosecond green pulsed Nd:YAG laser was used together with a red continuous wave (cw) He-Ne beam. At the output a narrow band filter was set to block the green beam and allow only the He-Ne beam. Then the transmitted beam was detected on an oscilloscope. It was found that the transmitted He-Ne cw beam was pulsating with a nanosecond duration and in synchronous with the input Nd:YAG nanosecond pulse. This demonstrated the characteristic table of an AND logic gate. A. Optical and Gate In an optical NAND gate the phthalocyanine film is replaced by a hollow fiber filled with polydiacetylene. Nd:YAG green picoseconds laser pulse was sent collinearly with red cw He-Ne laser onto one end of the fiber. At the other end of the fiber a lens was focusing the output on to the narrow slit of a monochromatic with its grating set for the red He-Ne laser. When both He-Ne laser and Nd:YAG laser are present there will be no output at the oscilloscope. If either one or none of the laser beams are present we get the output at the oscilloscope showing NAND function. faster read-out rates. This research is expected to lead to compact, high capacity, rapid-and random-access, and low power and low cost data storage devices necessary for future intelligent spacecraft. The SLMs are used in optical data storage applications. These devices are used to write data into the optical storage medium at high speed. Fig. 6. Optical Disk More conventional approaches to holographic storage use ion doped lithium niobate crystals to store pages of data. For audio recordings ,a 150MBminidisk with a 2.5- in diameter has been developed that uses special compression to shrink a standard CD’s640-MB storage capacity onto the smaller polymer substrate. It is rewritable and uses magnetic field modulation on optical material. The mini disc uses one of the two methods to write information on to an optical disk. With the mini disk a magnetic field placed behind the optical disk is modulated while the intensity of the writing laser is held constant. By switching the polarity of the magnetic field while the laser creates a state of flux in the optical material digital data can be recorded on a single layer. As with all optical storage media a read laser retrieves the data. A. Working The 780nm light emitted from AlGaAs/GaAs laser diodes is collimated by a lens and focused to a diameter of about 1micrometer on the disk. If the re is no pit where the light is incident, it is reflected at the Al mirror of the disk and returns to the lens, the depth of the pit is set at a value such that the difference between the path of the light reflected at a pit and the Fig. 5. Optical NAND-logic gate VI. OPTICAL MEMORY In optical computing two types of memory are discussed. One consists of arrays of one-bit-store elements and other is mass storage, which is implemented by optical disks or by holographic storage systems. This type of memory promises very high capacity and storage density. The primary benefits offered by holographic optical data storage over current storage technologies include significantly higher storage capacities and path of light reflected at a mirror is an integral multiple of halfwavelength consequently, if there is a pit where light is incident, the amount of reflected light decreases tremendously because the reflected lights are almost cancelled by interference. The incident and reflected beams pass through the quarter wave plate and all reflected light is introduced to the photodiode by the beam splitter because of the polarization rotation due to the quarter wave plate. By the photodiode the reflected light, which as a signal whether, a pit is on the disk or not is changed into an electrical signal. VII. APPLICATIONS 1) High speed communications: The rapid growth of internet, expanding at almost 15% per month, demands faster speeds and larger bandwidth than electronic circuits can provide. Terabits speeds are needed to accommodate the growth rate of internet since in optical computers data is transmitted at the speed of light which is of the order of 3.10*8 m/sec hence terabit speeds are attainable. 2) Optical crossbar interconnects are used in asynchronous transfer modes and Shared memory multiprocessor systems. 3) Process satellite data. VIII. MERITS 1) Optical computing is at least 1000 to 100000 times faster than today’s silicon machines. 2) Optical storage will provide an extremely optimized way to store data, with space requirements far lesser than today’s silicon chips. 3) Super fast searches through databases. 4) No short circuits, light beam can cross each other without interfering with each other’s data 5) Light beams can travel in parallel and no limit to number of packets that can travel in the photonic circuits. 6) Optical computer removes the bottleneck in the present day Communication system IX. DRAWBACKS 1) Today’s materials require much high power to work in consumer products, coming up with the right materials may take five years or more. 2) Optical computing using a coherent source is simple to compute and understand, but it has many drawbacks like any imperfections or dust on the optical components will create unwanted interference pattern due to scattering effects. Incoherent processing on the other hand cannot store phase information. X. SOME CURRENT RESEARCH High performance computing has gained momentum in recent years, with efforts to optimize all the resources of electronic computing and researcher brain power in order to increase computing throughput. Optical computing is a topic of current support in many places, with private companies as well as governments in several countries encouraging such research work. A group of researchers from the University of Southern California, jointly with a team from the University of California, los angles, have developed an organic polymer with a switching frequency of 60 GHz. This is three times faster than the current industry standard, lithium niobate crystal based device. Another group at brown university and the IBM, Alma den research center has used ultrafast laser pulses to build ultra fast data storage devices. This group was able to achieve ultra fast switching down to 100 picoseconds. In Japan , NEC has developed a method for interconnecting circuit boards optically using VCSEL arrays .Another researchers at NTT have designed an optical backplane with free-space optical interconnects using tunable beam deflectors and mirrors. The project achieved 1000 interconnections per printed circuit board; with a throughput ranging from 1 to 10 Tb/s. XI. FUTURE TRENDS The Ministry of Information Technology has initiated a photonic development program. Under this program some funded projects are continuing in fiber optic high-speed network systems. Research is going on for developing Fig.7. Use of optical devices in future New laser diodes, photo detectors, and nonlinear material studies for faster switches. Research efforts on an particle thin film or layer studies for display devices are also in progress. At the Indian Institute of Technology (IIT), Mumbai, efforts are in progress to generate a white light source from a diode case based fiber amplifier system in order to provide WDM communication channels. XII. CONCLUSION Research in optical computing has opened up new possibilities in several fields related to high performance computing, high-speed communications. To design algorithms that execute applications faster, the specific properties of optics must be considered, such as their ability to exploit massive parallelism, and global interconnections. As optoelectronic and smart pixel devices mature, software development will have a major impact in the future and the ground rules for the computing may have to be rewritten. XIII. REFERENCES [1] [2] See for example: Chemical and Engineering ews, Photonic Crystals. Assembled on Chip, 79(47), 31 (2001). P. Boffi, D. Piccinin, M.C. Ubaldi, (Eds.), Infrared Holography for Optical Communications— echniques,MaterialsandDevices,SpringerTopics in Applied Physics: Vol 86, July 2002. Alain Goulet, Makoto Naruse, and Masatoshi Ishikawa, Simple integration technique to realize parallel optical interconnects: implementation of a pluggable two-dimensional optical data link, Applied Optics 41, 5538 (2002) Tushar Mahapatra, Sanjay Mishra, Oracle Parallel Processing, OReilly Associates, Inc., Sebastopol, California, USA, 2000. S. J. van Enk, J. McKeever, H. J. Kimble, and J. Ye, Cooling of a single atom in an optical trap inside a resonator, Phys. Rev. A 64, 013407 (2001). A. Dodabalapur, Z. Bao, A. Makhija, J. G. Laquindanum, V. R. Raju, Y. Feng, H. E. Katz, and J. Rogers, Organic smart pixels, Appl. Phys. Lett. 73, 142 (1998). Henning Sirringhaus, Nir Tessler, and Richard H. Fr iend, Integrated Optoelectronic Devices Based on Conjugated Polymers, Science 280, 1741 (1988).

Existence of Racial Difference :: essays research papers

American tradition and culture is based around the concept of free speech. One can say what he likes, make any point he chooses, and express any opinion he desires in America. Anyone, from the homeless person, to the workingman, to the President of the United States himself is entitled to have an opinion, and to discuss it without impediment. It's considered a god-given right to speak what's on your mind. One thing that is never spoken of freely, however, is the subject of racial differences, what genetically separates us in terms of physical and mental abilities and instinct. It is almost a social "taboo" to go near anything that could possibly be construed as saying that somehow, we're not all the same, and somehow, race makes us different. Oh, no - talk about something like that and somebody might call you a "racist". And nobody likes to be called a "racist". But really, let's look at what makes us, as human beings, different from one another in terms of races of people.The differences between Negroes and Nordic Aryans particularly, because they are the most obvious and therefore the most well known. Well first, you would have to accept that there is a difference in skin color between a Black man and a White man, and this difference is caused by different melanin levels. What causes this difference? Why, it's evolution, that gradual process of genetic change due to the environment a particular species habitates. Negroes lived in very hot, sun-drenched parts of Africa, and they needed protection from the sun. So they evolved darker skin so they wouldn't get sunburned as easily. Now we all know that Africa is some of the most fertile, lush land in the world. Africa abounds with game and almost any type of fruit and berries imaginable. The actual deserts in Africa are quite small, and those images of starving African Negroes you see on your TV is only a very tiny portion of Africa's vast abundance. Any geography professor will tell you this, and they will tell you it has been like this for millennia. But look at the stark contrast in Northern Europe. The scarceness of food, the cold, the extreme Alpine landscapes of Sweden, Finland, and Germany. The birthplace of the Nordic Aryan, and a completely different type of place than Africa. Here you had to be on your toes, you had to think fast in order to survive.

Avila Auto Parts

a. The two methods of reporting in the parent company’s currency are different due to usage of different rates of exchange. Under the first method, the spot rates are to be used. Spot rates are the rates at which the transaction is carried out. This is normally a difficult approach and companies use the date on which the balance sheet and income statement is prepared. The spot is taken to be the rate of the balance sheet and other financial statements. The other method uses average rate of exchange of the period of reporting. In our case, using the two methods, we will have significant differences in the reported profits and losses. If we use the spot rate of balance sheet publication, the currency conversion factor will be 12000 pesos per dollar, whereas if we use average rate, the conversion will be done at 10,000 pesos per dollar. There will be a difference of 20 percent in the reporting. On the other hand, if the rate today has been less than the exchange rate at the beginning, the current reported figures would have been lower than those reported under first method. We should ideally use the method of spot rate at which payments are made. If it is not possible, the average rate would be better and consistent. Average can be taken for monthly figures or weekly rates to make it more accurate and representative of the realistic picture. As the income statement shows, the profits for the year were 25,000 million pesos in the local country. If it is translated to the parent company’s reporting currency using the spot rate of income statement, that is 12,000 pesos = $1, we will have net profits of $2,083,333. If we use the average rate of the period, that is (8,000+12,000)/2 = 10,000 pesos per $1, we will have net profits of $2,500,000 or $2. 5 million. Under both the methods of reporting the same profits/income of the company to its parent company, the profits are quite different simply due to the currency difference and exchange rate variation over the period. The difference in profits reported is more than $0. 4 million or roughly 20 percent which may change the decisions taken at headquarters. Taking into consideration the differences in the exchange rates and conversion risk, the company should decide on a measure to select the rate of exchange to use for its reporting during the entire life of the organization. They should consistently use whatever they have decided to use over their entire life. b. Functional currency is the one in which the operational cash is generated and is normally the currency of the country where the operations are going on. If the currency of the operating country is not stable, it can not be considered as functional currency. The stability of currency means that the rate of inflation over three year period should be less than 100 percent. As in the given case, the rate of inflation is 50 percent, (from 8,000 ps per dollar to 12,000 ps per dollar), the functional currency will be peso as the operational cash flows are generated in pesos and the inflation is within the limits. If the inflation over the past two years reaches 150 %, the functional currency will be changed to the reporting currency of the parent company, which in our case is dollar. . Economic exposure for Avila can be seen by the given conversion rates and their variability over such a short period of time. Economic exposure is the effect of foreign currency rate changes to the cash flows and other measures of operational performance. The exposure for any company is affected by the industry it is operating in and the stability of the currency of its operating country and the parent company. If there is excess demand of pesos, it will push th e rates of pesos higher and vice versa. If the rate gets higher, that is there will be less pesos in a dollar, the performance in the parent company’s report will be better than the situation when the exchange rate gets low. The two reporting methods will lead to significant differences in reported profits and losses to the parent company, from the operations in some other country. 3. Hedging can be a good option to protect the company against any unforeseen changes in the exchange rates. The company can make hedging I a number of ways to make itself protected against foreign exchange risk. Four positions are possible to provide such a protection using simple forward contracts and options. a. Long forward Under long forward position, the company at the operating country can take a long forward position to fix exchange rate (today) for a future date of transaction. Taking a long position means that the investor is agreeing to buy the underlying asset, at a specified price, agreed by both parties, on some future date. The contract has to be executed irrespective of what the conversion rate will be. Unlike options, none of the parties has the option to execute the contract or revoke it, but it is mandatory for both of them to carry it out. b. Short forward Short forward position can act equally well at the parent company’s location. The parent company at the parent country can go to short forward position so that it can sell dollars to pesos at a rate specified today. Using both the positions they can hedge the overall loss and can be certain about the expected gains. Options provide a type of insurance against any unforeseen changes in exchange rate. The buyer of call option and the seller of put option, both have the right to exercise the option or to waste it. The maximum loss in wasting the option is restricted to the price of the option. In this way, the company can set a floor to its loss and can gain as much as it can. c. Long Call Long call allows the parent company to buy a right to buy at a specified rate at some future point in time. If the rate increases, the company will have the option to buy at a lower rate than the market going rate, if it goes down, the loss will be restricted to the price of the option and the gains can be as much as the rate goes down. . Short Put Short Put will allow the company at the operating country to enter into a position to sell a right to sell at a set rate. The working for this will be exactly in the opposite manner as the long call position. 4. Financial architecture affects the overall cost for the company. If the inflation is high and the interest rates are high for a high risk firm , the cost of obtaining financing from banks and other Financial Institutions (FIs) will be high. Equity financing or market financing will require a higher rate of return, but the firm may shift the payments to some future period. As for bank financing or debt financing, it will have to make payments to the lending institution within the given timeframe. The firms may choose to go for a certain debt to equity ratio to gain advantage of optimal capital structure to optimize their costs of capital or WACC (Weighted Average Cost of Capital). 5. Euro currency is the use of currency in some other country. This in our case refers to storage, saving of pesos in the parent country where the currency in use is dollars. This will provide the company benefits in terms of advantage in domestic interest rate regulations and other barriers to free flow of cash. Firms participate in the euro currency markets to gain the benefits from exchange rate inefficiencies and under or over valuation of some currencies. If the investments are in the parent company’s currency and the operations are in the local currency of country where operations are being carried out, the exchange rate plays a vital role when calculating returns on investments for the company’s investments and funding by the parent company. If the domestic currency rises in operating country, the rate of return required should be higher than normal to overcome the exchange differences and vice versa. To overcome this difference and the problems due to fluctuating exchange rates, companies enter euro-currency markets where they can keep their money in parent company’s currency and convert it to functional currency as and when needed. This provides them the opportunity to maintain the required base in terms of parent company’s currency. 6. Other alternatives to run a firm’s fund-flow mechanism are to use various swaps in the form of interest rate swaps or foreign currency swaps. MNCs can go for unbundling of their costs at headquarters to affiliate companies of subsidiaries. In this way they can divide their costs to subsidiaries. Multinationals can go for transfer pricing mechanisms to avoid taxes on their overall operations. This can be done by pricing their internally traded goods for the purpose of moving profits to low tax nations. This will provide them an overall higher profitability. Companies can also create re-invoicing centers to avoid exchange rate fluctuations. The invoice currency will be the one used rather than the operating currency. This will reduce their exposure to currency and exchange rate risk. This will increase communication costs and to some extent create an overhead whereby the overall time delays and costs will be increased. MNCs can also transfer funds to their parent companies as dividends if the local conditions and regulatory framework is favorable. The major benefits of using different mechanisms can be obtained because of differences in the tax mechanisms and tax systems in different countries. Firms, by simply moving their profits from high tax region to a low tax region can save on their overall taxes provided the costs of moving are not high enough to make it unprofitable.

Mean Creek- Important Idea

Explain an important idea in a text you have studied. Explain why you found it interesting. Discuss visual and verbal techniques in your answer. In the film Mean Creek directed by Jacob Aaron Estes, the important idea of loss of innocence is very interesting as it tells the story and shows us how quickly things can change. The director shows us this through the way the characters change during the burial of George, the word â€Å"snap† written in a tree and the guilt felt by Millie and Sam. Firstly I found the important idea of loss of innocence interesting during the burial of George as this is when they lose their innocence.When they decide to bury Georges body the character all lose what innocence they had left. This is shown as everyone help besides Millie who doesn’t want to have a part in it. At this moment the director uses a combination of dark lighting and close up shots of Millie’s partially hidden face in the shadows of the trees to show how dark and l ost Millie has become since the death of George. She is hiding from the truth and wants to act like nothing is going to change. The director also uses a slow sad chelo during this scene as lament like, it is a metaphor for the death of Millie’s and everyone else’s innocence.Millie is already starting to feel guilty as she earlier in the film stated â€Å"go ahead Clyde start the game†. This shows she does not feel innocent at all but does not want to admit it. When Millie is by herself instead of helping with the burial a foley effect is used as she stabs a snail followed by sudden silence. This was Millie’s was to let at all her frustration and anger on the events that have occurred and her own actions which contributed in Georges death. This scene helps makes the important idea interesting as it is the moment when they all lose their innocence.Secondly I found the important idea interesting through the way Millie carved the word â€Å"snap† into a tree. At the start of the film when Millie and Sam are innocently talking about what George did to Sam, Millie says â€Å"If you could snap your fingers and he would drop dead in his tracks would you? A wide shot is used to show George sitting down by himself, this shows how lonely he is and makes us actually feel sympathy towards him. This is followed by silence which shows how Sam doesn’t want to hurt George. This emphasises the innocence of Sam as he did not wish to do anything which could result in the death of George.This Quote foreshadows the death of George. As a viewer tension builds u as we wait the events that link to the death. After the death of George, Millie engraves the word â€Å"Snap† into a tree. This is significant as it shows how life can change as fast as the snap of the fingers. A foley effect is used on the scratching of the knife on the tree to show Millie’s anger and how she feels they have not only turned flipped there life upside do wn but they took a life and destroyed Georges relatives lives. The foley effect turns your attention the Millie as the viewer anticipates what she is writing . e now see how just 24 hours before they were all living a normal happy life but now they are emotionally distort and stumped for a conclusion of what to do. The word snap makes the important idea of loss of innocence interesting as it shows how fast they have totally lost their innocence. Lastly loss of innocence is seen as interesting as Millie and Sam come out and talk about what has happened. When Sam goes to Millie’s room we notice a great change in her personality and feelings. Millie is no longer a bright happy person as we now see her as a frightened little girl.The director uses dark lighting and a wide shot to shows as Millie steering into the mirror. When Millie is steering into the mirror it is silent as she looks frustrated and confused as if she thinks her appearance should have change but everything looks the same as if nothing has happened. When Sam talks to Millie a combination of dark lighting and close up shots of Millie’s half hidden face in the darkness of her bedroom show us how miserable she looks as she is hiding from the truth and is in denial of the fact that their life has changed. What do you want†, â€Å"I was just there† shows us how Millie does not want to accept the truth as well as the consequences of her actions but knows she can not live with all the guilt. Millie was trying to act like she feels innocent but the remorseful ton in her voice suggests otherwise. Sam and Millie know they are not innocent as the guilt inside them grows and makes them wonder if keeping George’s death a secret is the best thing to do. When we become doctors and lawyers and all that what do you think it will be like? † The director follows this question with silence to show how they both think telling the truth and accepting the consequences will be best . This makes us feel sorry for them and it is as if some of their innocence has come back to them as we are reminded of the fact that they are still children when they talk about their future and that they have â€Å"come to a decision† of telling the truth which is what they wanted in the first place.In conclusion I found the important idea of loss of innocence very interesting as the director takes as on a roller-coaster of feelings as kids make the biggest decision of their lives. With the burial of George, the word â€Å"Snap† and the guilt felt by Sam and Millie the children’s innocence is lost but they regain some as they come to the correct conclusion. The interesting idea of loss of innocence shows us how fast some of the most innocent people feel guilty and how people can unintentionally lose their innocence in a matter of minutes.

The Time Travelers Wife Film Analysis According to the Book

The Time Travelers Wife Film Analysis According to the Book Intimate Relationships theories by Rowland Miller At the beginning, I would like to emphasize, that the film â€Å"Time Traveler’s Wife† is one of the best examples of relationships for the analyses through the prism of Rowland Miller’s theories and concepts. The latter had been found in the 5th edition of Interpersonal Relationships, outlining the processes of formation, development, and deterioration of human connections, explaining the problems and the roots of these problems of human relationships, and, generally, covering the main aspects of relationships paradigm. Firstly, it would be appropriate to point out the main theories of Rowland Miller’s research into interpersonal relationships. To follow the natural human development while growing up, Rowland Miller offers to our consideration the attachment theory. There he, together with scholar Dollard and Bowlby, describes the formation and mechanism of attachment, which occurs with a personality in th e years of early childhood. The attachment theory is being considered through the prism of two main approaches, including learning and evolutionary theories. The first theory anticipates the fact of child’s attachment formation to people, who provide the most primary care, while the latter claims, that children are ready to get attached to those, who respond to their releasing stimuli. Advertising We will write a custom essay sample on â€Å"The Time Traveler’s Wife† Film Analysis According to the Book specifically for you for only $16.05 $11/page Learn More They choose a particular attachment figure, which is supposed to be further used as a firm ground for world exploration and cognition. This first child’s attachment is a pattern for interpersonal relationships in future. The next theory, introduced in the work of Rowland Miller is interdependence theory, which is inextricably linked to the terms of CL (comparison levels) and CLalt (comparison levels for alternatives). The author represents the definition and concepts of CL, which means for â€Å"the expectations that determine whether or not we are satisfied with our relationships† and CLalt , which, in its turn, denotes to â€Å"our perceptions of how well we would do if we left our current relationships†. [2] Generally, the psychologist expresses his point of view, connecting the state of satisfaction with the state of dependence. Naturally, the both mental and emotional aspects concern the issue of relationship. Hence, interdependence theory considers the interrelation between one’s expectations and one’s outcome, the balance or misbalance between what we wanted to have and what we really have. The author also emphases the inability to set a clear boundary between satisfaction with the relationships and dependence on it. Triangular love theory, being described in the Chapter 8 of the book Intimate Relationships, concerns the matter of the three separate units, the combination of which are to set up healthy long-term relationships. These are closeness, fervour, and responsibility. The author claims, that love, including only one part is much weaker, than love, including all the three in a â€Å"composite†. Rowland Miller explains, that there are many aspects, which have to be taken into consideration while analyzing love relationships. The vital role belongs to culture as a major determiner of a personality’s behavior and world outlook. Cross-cultural differences may be a reasonable destroyer of intimate relationships just for the reason, that mentality of one peoples does not fully coincide with the mentality of other. The author provides a reader with information about social exchange theory.Advertising Looking for essay on art and design? Let's see if we can help you! Get your first paper with 15% OFF Learn More This theory states, that a person chooses his/he r partner according to his/her own idea about â€Å"prize and price†. A person has always been thinking about the relationship type he or she deserves. Reward is a vital issue, without which it is impossible to build up strong and healthy relationship. Defining the word â€Å"reward† in this context we cannot but mention that there exists a straight proportion between the time and effort put into the relationships on the one side and the formal â€Å"size† of reward expectations on the other side. As an analogy to the interdependence theory, the theory of social exchange is determined by balance. This balance is to be reached between the two factors, which are mentioned above. Otherwise, the relationships are doomed to misunderstanding and personal discomfort. Talking about correspondence of our needs and expectations with what we become in return, we cannot but mention the theory of cognitive dissonance. The author implies this theory to the situations of cont radiction. The latter lies the feeling of discomfort while coming to terms with two opposite statements, actions or phenomena. The theory of cognitive dissonance reflects the necessity of â€Å"reaching the compromise† between these opposites by altering our views and behaviors, making them suitable for each other and trying to combine them that they were logically corresponding. According to Rowland Miller, cognitive dissonance appears, when the particular beliefs are of the opposite extreme nature and cannot be hold by one person at a time. Hence, the most forceful reason of cognitive dissonance is an internal conflict about whether you have done right or wrong. Personal self-awareness leads to looking for excuses, finding some causes, which would explain your actions. The author uses a term of â€Å"rationalizing† while discussing this issue. In addition, the topic of cognitive dissonance deeply concerns the matter of egoism, so to say, protection of oneself from destructive processes. Moreover, the term of self-image is being used in the book referring to the willingness of a person to correspond to his/her own idea about him/herself. In further description of Rowland Miller’s ideas, I would like to provide the quotation taken from the book Intimate Relationships: The more we see and interact with a person, the more likely he or she is to become our friend or intimate partner. [3]Advertising We will write a custom essay sample on â€Å"The Time Traveler’s Wife† Film Analysis According to the Book specifically for you for only $16.05 $11/page Learn More This conception, defined by the psychologist as a propinquity effect, is one of the key points in strong relationships maintenance. Interpersonal relationships are also highly affected by such factors as personal traits resemblance, attractiveness, and mutual liking. Rowland Miller pointed out that â€Å"attitude similarity activates the perceiv ed attractiveness and favorability information from each other, whereas dissimilarity would reduce the impact of these cues†. [2] â€Å"Time Traveler’s Wife† Film Analyses According to the Theories and Concepts of the Fifth Edition of Book by Rowland Miller Intimate Relationships Its hard being left behind. I wait for Henry, not knowing where he is, wondering if hes okay. Its hard to be the one who stays. /Clare/ Indeed, relationships themselves are very complicated issue, leaving alone such relationships Clare and Henry had. Here we are talking about a romantic love story, including the elements of scientific fiction however, pretty much realistic – kept the viewer on the edge of his/her seat. Henry and Clare, the protagonists have met for the first time during one of Henry’s time travels. At that time this beautiful and smart little girl Clare has seen a good-looking handsome man, which soon has become her best friend.Advertising Looking for essay on art and design? Let's see if we can help you! Get your first paper with 15% OFF Learn More Generally, each relationship has universal stages, which they come through while its existence. We can metaphorically compare relationships to human organism, which is born, than is developing, getting older and, consequently and inevitably dies. Therefore, the scholars distinguish the following stages of relationships: Acquaintance Development Decay So, when a little girl Clare has met her future love, we can observe the acquaintance stage. There, according to Rowland Miller, we can watch clearly illustrated theory of attachment. The girl has namely found her â€Å"base†, her â€Å"firm ground†, and no wonder it was approximately 35-year-old man. They have spent a lot of time together; he was one of the main source of her world cognition. Henry was the one who shaped her outlook, Henry was the one, whom he wanted to marry since her early childhood. The attachment strings became stronger and, due to mutual liking, interpersonal relationships became closer. During th ese time travels Clare was practically brought up by Henry. He was destined to be both her â€Å"father† and her lover. The time passed, and, naturally, the girl grew up and came to the point, when she realized, that Henry was her one and only love. At this point we have to provide the other type of relationships development stages. It is as follows: ROMANCE STAGE POWER STRUGGLE STAGE STABILITY STAGE COMMITMENT STAGE CO-CREATION STAGE So, the development of Clare and Henry’s relationships has come to the stage of transformation into romantic ones. The romantic stage lasted quite long, until their first meeting at the library. This stage can be characterized by the triangular love theory, where the two young people were combining the three most important components of healthy and strong relationships. Intimacy together with passion and commitment has made their lives full of happiness and joy, which only the true feeling can bring. They have been developing their rel ationships, which have undoubtedly led to wedding and marriage. There, however, we see the first roots of dissatisfaction in Clare’s feelings. But, at first, she covers them with the idea of true love to the person, for whom she has been waiting for her whole life. At this stage of relationships, the interdependence theory can be considered as an appropriate one in analyzing the position of Clare. At the CL (comparison level) the viewed can observe her inner doubts about how she is going to spend her life with a person, who is constantly traveling in tie and, what is more, unexpectedly. We could see the facial expression of a beautiful bride, who was left alone on the first night after the wedding party. Disappointed, she was lying on the bed trying to find excuses for the situation. However, she did found an â€Å"excuse†, being motivated by the thought, that they are really worth of each other and their love is worth fighting for. When years passed, Clare’s d issatisfaction was growing, her husband’s constant disappearing for indefinite time and unexpected coming back has caused increasing disappointments. There we can obviously notice the stage of power-struggle, the conflict of the interests of two people, whose feeling of love cannot fit into the inconveniences of practical world. Henry could not meet an ordinary woman’s requirements. Finally, after his last time travel, which lasted two weeks, he came back home, and found his wife angry and disillusioned in her own feelings. The viewer can follow how the social exchange theory is illustrated in this case. Clare has a feeling of inequality, being somehow subordinate while waiting for her husband. She is tired of being a puppet of these relationships and decides to start leading her own life. According to the theory, Clare finds, that she has spent so much time and effort on this marriage; she has tried everything and devoted herself to these relationships. However, she did not get any feedback, so-called â€Å"reward†. In this case, feeling deprived and offended, feeling, that she deserves â€Å"a normal life† induced her split with Henry. There, at the same time, we can see the example of cognitive dissonance theory. A viewer can observe typical ego-defense, which is based on willing of self-realization, living without dependence on her partner, who even does not have any social status. Indeed, during the stage of power-struggle the most divorces occur, and Clare really separated from Henry. Logically, both of them were far from being happy and satisfied with life. However, not long after, Henry makes use of his ability to travel in time and wins a lottery. This event essentially changes the quality of life of the both. They buy a large house with a separate place for Clare to work on art. So, we can state, that these two people have managed to overcome the hard times of power-struggle stage. Summing up the behavior of the protagoni sts during this period, we can say, that Henry wanted to deal with the conflict in a non-destructive manner, while Clare was at first not keen on preserving the relationship. She was unwilling to deal with the problem, she let away her aggression and discontent and did not want to seek for a compromise, to be tolerant and understanding to her husband’s way life, which he was actually not to blame. However, stability stage in the development of Henry-Clare relationships proceeds. They both are satisfied with everything they have, Henry’s timetravels have become not so often. Clare works at her little art house. Their life has acquired balance and harmony. However, the next stage of relationships strikes their faith and hope. The couple wants to give birth to a baby, but it appears, that baby is supposed to get the same â€Å"travel-ability†, like the father. That was the reason for the loss of Clare’s two children. The relationships had to face another ord eal. The conflict has started to destroy the relationship; everyday quarrels were the reason for couple’s disillusion in their happy life. However, soon Clare got pregnant and gave birth to a girl, which Henry has seen in his time-travels. Life has begun to get better and brighter. Parents, having one â€Å"aim† of child upbringing have become closer. There a viewer can observe the stage of commitment and co-creation. During this period the two people as the two separate individuals are becoming one inseparable organism, which is functioning in balance and harmony. They build up healthy relationships on the basis of mutual understanding and cooperation. This stage is determined by affection and care for each other, both talking about the both partners and about the relationships with children. To follow the plot of the film, a viewer observes further events development from the prism of fatality. Naturally, the film could hardly be called a drama and, therefore, win a ttention, without some â€Å"break†, tragic climax of love relationships. Here, in ‘Time Traveler’s Wife’ the observer can analyze the situation of Henry’s own death perception. Inability to change inevitable events at first causes mere disillusion inside of the protagonists, who are supposed to wait for the fate’s will. However, they continue to live as they use to, realizing, that everything is in the Lord’s hands. Love as a state, as a feeling and emotion between the protagonists is transcendental. It has become on the higher stage of development, which presupposes the willing to sacrifice for each other, giving away all the tenderness and warmth you have without asking anything in return. List of References Aronson, Elliot, Timothy D. Wilson, and Robin M. Akert. Social Psychology Sixth Edition. New Jersey: Upper Saddle River, 2007 Miller Rowland S. On Being Admired but Overlooked: Reflections on Attention to Alternatives in Close Relationships Psychological Inquiry, Vol. 14, No.  ¾ 2003, pp. 284-288 Miller, R, Perlman, D, Brehm, S Intimate Relationships. New York: McGraw-Hill, 2006. pp.608

Definite Articles Il and Lo in Early Italian

Definite Articles Il and Lo in Early Italian In early Italian, the use of various forms of the definite article was a little different than today. The form lo was more frequent than in modern Italian, and it was also used in many cases in which il was subsequently called for. Today,  lo precedes nouns beginning with s impura (s consonant), (lo Stato), z (lo zio), gn (lo gnomo), sc (lo sciocco), pn (lo pneumatico), ps (lo psicologo), x (lo xilofono), and with i semiconsonantica (semivowel i) (lo iodio). All other masculine nouns starting with a consonant are preceded by the article il. In early Italian, however, the form il could only be used after a word ending in a vowel and before a word beginning with a consonante semplice (simple consonant). In those cases, it could also occur in the reduced form l. Here are two examples from Dantes Divine Comedy (more specifically from Inferno: Canto I: mavea di paura il cor compunto (verso 15);l, dove l sol tace (verso 60). However, the form lo can be used in both cases, given that the final sound of the previous words ends in vowels and the initial sounds of the next words end in simple consonants. In particular, the use of this form was mandatory at the beginning of a phrase. Here are some examples, again taken from Dantes Divine Comedy: si volse a retro a rimirar lo passo (Inferno: Canto I, verso 26);Tu se lo mio maestro (Inferno: Canto I, verso 85);Lo giorno se nandava (Inferno: Canto II, verso 1). The differences in the use of the articles lo and il could be summarized as follows: in early Italian, lo was used more frequently and could be used in all cases (even if il was expected). In modern Italian il is found more frequently, and unlike in early Italian, there is no overlap in the usage of the two articles. How Is Lo Used in Contemporary Italian? The early use of the article lo instead of il continues in contemporary Italian in adverbial phrases such as per lo pià ¹ (for the most part) and per lo meno (at least). Another form which still occurs today (but in very limited use), is the plural li. This form is sometimes found when indicating a date, especially in bureaucratic correspondence: Rovigo, li marzo 23 1995. Since li isnt an article recognized by most Italians today, it is not uncommon to see it misspelled with an accent, as if it were the adverb of place là ¬. Of course, when speaking one says Rovigo, il marzo 23 1995, while in general in correspondence it is preferred to write 23 marzo 1995 (without the article). In  Italian, the article, whether an  articolo  determinativo  (definite article), an  articolo  indeterminativo  (indefinite article), or an  articolo  partitivo  (partitive article), has no independent lexical meaning in a sentence. It serves in various ways, however, to define the  noun  it is associated with, and with which it must agree in gender and number. If the speaker wants to say something about a dog (for example), he must first specify whether the statement is intended to refer to all class members (Il cane à ¨ il  migliore  amico  delluomo.- Dog is mans best friend.) or a single individual (Marco ha un cane pezzato.- Mark has a spotted dog). The article, along with other parts of speech, for example,  aggettivi  dimostrativi  (questo  cane- this dog), (alcuni  cani- some dogs), or  aggettivi  qualificativi  ( un bel cane- a beautiful dog), performs the important function of determining the nominal group.

Implementing Technology Tools and Sites in the Curriculum Assignment

Implementing Technology Tools and Sites in the Curriculum - Assignment Example This study discusses that the contemporary society is defined by development in all facets of life including the economic, social, and technological fronts. Such development ought to be integrated into the learning environment as the children are being prepared for the real life experiences. Technological advancements have created various avenues through which the learning experience can be made more easy, understandable, and enjoyable to the student as it has been made easier for the educators to disburse information and interact with the individuals at individualized levels through student-centered approaches. Various tools provided by technology can be employed both within and outside the classroom to enhance student learning and promote interactive approaches to learning. When employing such technologies, it is important for the teachers to be well aware of the National Education Technology Standards for Teachers and the need to implement the Universal Design for Learning (UDL) e lements. This paper involves the application of the Kahoot, FunBrain, and Wikispaces technology tools in the classroom to facilitate student learning.This paper highlights that  Kahoot forms one of the effective interactive tools that can be employed in the classroom environment to achieve increased understanding among the students and facilitate increased student engagement in the learning process.